FW ASW-27 1:3 full composite kit

€3,350.00 *

Prices incl. VAT plus shipping costs

Delivery time on request

  • 25300
Our ASW27 S is also like the asg29 a modern hig performance glider with very good versatile... more

Our ASW27 S is also like the asg29 a modern hig performance glider with very good versatile flying qualities. The computed airfoil of thickness 11-under 9% is perfectly suited for this use and allows a wide speed range. Circling with the AS27S in a weak thermal lift is easy, and due to its low drag and excellent conversion between altitude and speed it is perfectly suitable for aerobatics and high speed flight. We growing up the wing span from 5m to 5,2m because of the aerodynamic performance of the asw27. Flaps and ailerons are hinged at the lower side, hence touching down at the slope is comfortable thanks to the crow configuration of the flaps. With a mass of only 13.5 kg the ASW27 is very light, and fitted with a CEFLIX 500 EDF it is able to self-launch on a grassy runway. Because of the thin airfoil the wing is built in an all carbon hard shell technique, and the square wing joiner of dimensions 18x40 mm is made of carbon, too. The stability of the wing is very high and well suited for velocities above 300 km/h even at demanding conditions.

  • Hochfester VollCfk-2-Klappenflügel mit spaltfreier Anlenkung / full carbon wing with 2 flaps
  • Flügel für Überkreuz-Anlenkung vorbereitet / wing prepared for crossover servo linkage
  • 18 x 40 mm CFK–Vierkant Verbinder / 18 x 40 mm carbon wing joiner
  • Rumpfverstärkung mit UD-Gfk im gesamten Hauben- und UD–Cfk im Röhrenbereich / fuselage reinforcements with additional glas fibres in the cockpit area and UD-carbon in the tail boom
  • Kabinenrahmenmechanik mit Gasdruckdämpfer, Sitzwanne, Sitz und Seitenteile / canopy mechanics with gas spring + pilot seat + cockpit side covers included
  • Flügelverriegelung mit M6 Verschraubung, bereits fertig eingebaut / wing lock system with M6 screw installed
  • Packmaß Flügellänge 2480mm / wing length without winglet 2480 mm
  • Höhenleitwerk sowie Flügel bereits montiert / Wings and elevator assembled
  • Farbstabilität durch UV-beständigen Zwei-Komponenten-Lack RAL 9003 – Kein Vergilben mehr und gute Reparaturmöglichkeit / Compound paint with high UV resistance
  • GfK-Rumpfrücken lackiert, keine Naht sichtbar!! / Fuselage seam line painted over
All technical information at a glance: more
Scale: 1:3
Spannweite: 5,20 m
Rumpflänge: 2,19 m
Gewicht (flugfertig) ca.: 11,00 kg
Tragflächen Profil: 11%-9%
Bauweise/Material Tragfläche: carbonfibre
Bauweise/Material Rumpf: fibreglass/carbon
Transportlänge ca.: 2,40 m
Dokumentation zum Artikel. more
Related links to "FW ASW-27 1:3 full composite kit"